Kränzle 41 190 1, Руководство по эксплуатации, Страница: 10 / 25

18 19
6PDOOUHSDLUV'RLW\RXUVHOI
Stopping leaks from hose or gun
$IWHUFORVLQJWKHJXQWKHPDQRPHWHUVKRZVIXOOSUHVVXUH
7KHSUHVVXUHUHJXODWRUVZLWFKHVRQDQGRIIFRQWLQXRXVO\
Press the trigger
to release the
SUHVVXUH
If the
manometer
shows full
pressure,
First dis-
connect the
KRVH
Then unscrew
the pump outlet
with an open-jew
wrench.
Clean the return
element or replace
WKH25LQJ
The pressure
regulator
switches on
and off from
pressure
ORVV
Water can emerge at
these 3 points.
Check the seals and
replace the O-Ringe if necessary
or ave the gun checked by the dealer.
Replace the O-Ring
at the lance or at the
+3KRVHUHVSHFWLYHO\
Reconnect
the hose, gun
DQGODQFH
Problem
VROYHGDOUHDG\
General rules
The machine must be inspected according to the „Guidelines for Liquid Spray De-
YLFHV³DWOHDVWRQFHHYHU\PRQWKVE\DTXDOL¿HGSHUVRQWRHQVXUHWKDWFRQWLQX
-
ed safe operation is guaranteed. The results of the inspection are to be recorded
in writing. This may be done in any form.
Inspections:
The machine is designed for accidents to be impossible if used correctly. The
RSHUDWRULVWREHQRWL¿HGRIWKHULVNRILQMXU\IURPKRWPDFKLQHSDUWVDQGWKHKLJK
pressure water jet. The „Guidelines for Liquid Spray Devices“ must be complied
with. (see page 12 and 13)
Accident prevention
Check the oil level at the oil sight glass prior to each use.
(QVXUHKRUL]RQWDOSRVLWLRQ7KHRLOOHYHOVKRXOGEHDWWKHPLGGOHRIWKHVLJKW
JODVV:LWKKLJKDWPRVSKHULFKXPLGLW\DQGWHPSHUDWXUHÀXFWXDWLRQWKHUHPD\EH
condensation (oil has a greyish colour); Then the oil must be changed.
Oil change for high-pressure pump B170 T / B200 T
First oil change after approx 50 hours of operation. Thereafter, no more oil change
is required for the lifetime of the equipment. If it becomes necessary during repairs
to perform an oil change, then the oil sight glass should be opened and the oil
emptied into a container. The oil must be caught in a container and disposed of in
a responsible, legal manner.
1HZRLOO0RWRURLO:
Oil change for high-pressure pump B230 T / B240 T / B270 T
The oil of your high pressure pump should be changed after approx. 40 hours of
operation, or no later than when it takes an a grey or whitish colour. Open the oil-
plug over a container and drain off all the oil. The oil must be caught in a contianer
and disposed of in a responsible, legal manner.
New oil: 1,0 l - Castrol Formula RS
Oil leak
In the event of an oil leak contact customer service (dealer) immediately. (damage
to environment or transmission)