KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
2
The Kramer
WPN-11
wall plate includes:
An XGA input (up to UXGA resolution) on a standard HD-15 connector
A set of RCA connectors that can be used for component video
1
/RGB,
s-Video (Y/C), or composite video
A button for selecting component/RGB/composite/s-Video (Y/C) or XGA
OUTPUT TO LINE terminal block connectors that connect to the
corresponding INPUT FROM LINE terminal block connectors on the
WPN-12
using the optional BC-5X5S cable
2
A standard 12 Volt DC feed that lets the
WPN-12
derive its power via the
power supply of the
WPN-11
.
The system can be powered from either the
WPN-11
or
WPN-12
3
The Kramer
WPN-12
wall plate includes:
An XGA output on a standard HD-15 connector
A set of RCA connectors that can be used for component
1
video/RGB,
s-Video (Y/C), or composite video
INPUT FROM LINE terminal block connectors that connect to the
corresponding OUTPUT TO LINE terminal block connectors on the
WPN-11
using the optional BC-5X5S cable
2
The BC-5X5S cable
2
(not supplied
4
) is very flexible, letting you run different
channels on the single cable—component video/RGB, s-Video (Y/C),
composite video, audio, DC and so on. It has 5 coax (conductor and shield)
cables (red, green, blue, yellow, and black), and 5 thin wires (red and black, as
well as yellow, brown and orange).
Achieving the best performance means:
Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)
Positioning your
WPN-11
and/or
WPN-12
Kramer wall plate securely,
and away from moisture, excessive sunlight and dust
1 Sometimes called YUV, or Y, B-Y, R-Y, or Y, Pb/Cb, and Pr/Cr
2 See section 4.3
3 The WPN-11 is a passive tool that sends out power but does not use it
4 Available in various lengths
