KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your WP-220 XGA/Audio/Video Line Driver
2
connectors, and a video output 2-pin connector that connects to the coax cable
(one pin is for the composite video signal, and the other is for the Ground))
2 unbalanced stereo audio inputs (a PC audio input on a 3.5mm mini jack,
and an audio line input on left and right RCA connectors)
2 balanced stereo audio outputs (a PC audio output on a terminal block
connector, and an audio line output on a terminal block connector)
In particular, the
WP-220
has:
Left and right audio level controls
EQ. control to adjust the XGA cable compensation (equalization) level
EQ., and level controls to adjust the CV cable compensation
(equalization) level
Video bandwidth of 500MHz, that ensures transparent operation for all
resolutions
A standard 12 Volt DC feed
Achieving the best performance means:
Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)
Avoiding interference from neighboring electrical appliances and
positioning your
WP-220
away from moisture, excessive sunlight and dust
4 Your WP-220 XGA/Audio/Video Line Driver
This section defines the
WP-220
XGA/Audio/Video Line Driver
:
Front panel (see section 4.1)
Left panel (see section 4.2)
Right panel (see section 4.3)
RGBHV Outputs (see section 4.4)
