Kramer VSM-4x4HFS, Руководство пользователя

Страница: 14 / 85

VSM-4x4HFS - Connecting and Operating the VSM-4x4HFS 9
9
5 Connecting and Operating the VSM-4x4HFS
The VSM-4x4HFS is a four-in-one-box device. It can operate as a:

Matrix switcher

Video wall

Dual switcher

Quad switcher
You can select the different operation modes via front panel buttons, the IR remote
control transmitter, the OSD menu or via the Web pages.
This section describes how to connect and operate the VSM-4x4HFS for operating
in each of the four operation modes (see Section
5
).
Always switch off the power to each device before connecting it to
your
VSM-4x4HFS . After connecting your VSM-4x4HFS , connect
its power and then switch on the power to each device.
You do not have to connect all the inputs and outputs, connect only
those that are required.
5.1 The Matrix Mode
The VSM-4x4HFS matrix switcher mode is the default operation mode. Any of the
four inputs can be switched to any of the four outputs. Switching is immediate and
seamless.
5.1.1 Connecting the VSM-4x4HFS in the Matrix Operation Mode
To connect the VSM-4x4HFS in the MATRIX mode, as illustrated in the example in
Figure 3 , do the following:
1. Connect up to four HDMI sources (for example, laptops and/or Blu-ray disk
players) to the HDMI INPUT connectors (from INPUT 1 to INPUT 4).
2. Connect the four HDMI OUTPUT connectors (from OUTPUT A to OUTPUT
D) to up to four HDMI acceptors (for example, LCD displays and/or
projectors).
!
i