Kramer Electronics Ltd.
VS-88UT
– Connecting VS-88UT and VS-84UT
11
▪
An audio source (for example, an MP3 player) to the AUDIO INPUT 5 analog audio
3.5mm mini jack connector (5 to 8)
.
3. Connect the HDMI and HDBT outputs:
▪
The HDMI OUT 3 HDMI connector (1 to 4, 7 and 8)
, to an HDMI acceptor (for
example, a display).
▪
The OUT 6 (HDBT) RJ-45 port (5 to 6)
to a receiver (for example, the Kramer
TP-590Rxr
).
4. Connect the audio outputs:
▪
The AUDIO LINE OUT (1 to 2) Terminal Block connector
to a balanced audio
acceptor (for example, active speakers).
▪
The POWER AMP OUT block connector
to a pair of loudspeakers, by connecting
the left loudspeaker to the “L+” and the “L-” terminal block connectors, and the right
loudspeaker to the “R+” and the “R-” terminal block connectors.
Do not ground the loudspeakers.
5. Connect the IR ports:
▪
HDBT IR IN 8 (5 to 8) 3.5mm mini jack
to a room controller (for example, the
Kramer
RC-74DL
) to control a peripheral device, such as Blu-ray player that
connects to the transmitter that is connected to HDBT IN (8).
▪
HDBT IR OUT 6 (5 to 6) 3.5mm mini jack
to an IR controlled device (for example,
a Blu-ray player) so that it can be controlled by a controller that is connected to a
receiver that connects to the OUT 6 (HDBT) port.
6. Connect the USB ports:
▪
A keyboard and a mouse to HDBT USB 2 ports
.
The USB signal passes via HDBT IN to a transmitter (for example TP-590Txr) where
a laptop can be controlled.
▪
A laptop to USB HOST 1 port
.
A receiver (for example
TP-590Rxr
) connected to HDBT OUT controls this
connected laptop.
7. Connect RS-232 3-pin terminal blocks:
▪
RS-232 HDBT DATA
– Connect to a laptop to control peripheral devices that are
connected to transmitters/receivers that connect to the HDBT IN / HDBT OUT ports.
▪
RS-232 CONTROL
– Connect to a laptop to control
VS-88UT
.
8. Connect ETH ports:
▪
CONTROL
– Connect to a laptop to control
VS-88UT
.
▪
DATA 1G
– Connect to the Ethernet to pass data via the cloud.
