Kramer VS-81HDxl, Руководство пользователя

Страница: 10 / 29

VS-81HDxl - Overview 7
VS
-8
1
HD
–
Ov
e
rv
ie
w
7
Figure 2: VS-81HDxl 8x1 HD/SD
‑
SDI Switcher Rear Panel
# Feature Function
6 GENLOCK IN BNC Connector Connect to the genlock source
7
GENLOCK TERM Button
Press to terminate the genlock source (75

) or release for looping to another unit
8 GENLOCK LOOP BNC Connector Connect to the GENLOCK connector of the next unit in the line
9 INPUTS BNC Connectors Connect to the serial digital video sources (from 1 to 8)
10 OUTPUTS SDI BNC Connectors Connect the two identical SDI outputs to serial digital video acceptors (1 and 2)
11 RS-485 Detachable Terminal Block Port PIN G is for the ground connection; PINs B (-) and A (+) are for RS-485
12 RS-232 9-pin D-sub Port Connects to the PC or the Remote Controller via a null-modem
13
REMOTE Terminal Block Connector Connect to contact closure switches (see Section
‎5.5
)
14 MACHINE ID DIP-switches DIP-switches for setting the machine ID number
15 REMOTE IR Opening Connects to an optional external IR receiver unit for controlling the machine via an IR
remote controller (instead of using the front panel IR receiver)
16 ETH RESET Button Press to reset to factory default definitions:
First disconnect the power cord and then connect it again while pressing the ETH Factory
Reset button. The unit will power up and load its memory with the factory default definitions
IP number

192.168.1.39
Mask
– 255.255.255.0
Gateway
– 192.168.1.1
17 ETHERNET Connector Connects to the PC or other Serial Controller through computer networking
18 Power Connector with Fuse AC connector enabling power supply to the unit