Kramer VS-611DT, Руководство пользователя

Страница: 16 / 54

VS-611DT – Operating the VS-611DT 11
To select the auto switch mode:
1. Press the Auto/Man button to turn the Auto LED on.
2. Press the Last/Prio button to select an auto switch mode:

Last connected (Last LED on) – The device always switches to a newly
detected active video source. When the device is powered on, the
output switches to the highest priority input.

Priority (Last LED off) – The device always switches to the highest
priority input source. The default priority is Input 1 then Input 2.
5.1.3 Manual Override Mode
Auto switch mode can be overridden by a manual command, such as pressing an
input button or sending a control command. In such a case, the system switches to
the manually selected source. If this manually selected source is not active, the
system waits a set amount of time (10 seconds, default, adjustable on the Web
page) and then switches back to Auto mode. Manual override selection is not stored
in non-volatile memory.
A step-in command is considered a manual switching command.
5.2 Performing a Factory Reset
Factory reset returns all the parameters of the device to their factory default
settings.
To perform a factory reset:
1. Disconnect device power.
2. Press and hold Input 1 while reconnecting device power.
All indicators flash while resetting to the factory default parameters. When all
the lights turn off the reset is complete.