Kramer VS-611DT, Руководство пользователя

Страница: 13 / 54

8 VS-611DT - Connecting the VS-611DT
4 Connecting the VS-611DT
Always switch off the power to each device before connecting it to
your
VS-611DT . After connecting your VS-611DT , connect its power
and then switch on the power to each device.
You do not have to connect all the inputs and outputs, connect only
those that are required.
To connect the VS-611DT as illustrated in the example in Figure 2 :
1. Connect up to six HDMI sources (for example, KDS-MP4(s), laptop(s),
DIP-31(s)) to INPUTs 1-6 using HDMI cables.
2. Connect the HDBT OUT RJ-45 connector to an HDBaseT acceptor (for
example, a TP-780Rxr HDBaseT receiver or an HDBaseT projector) using
an HDBT twisted pair cable.
3. Connect the HDMI OUT connector to an HDMI acceptor (for example, a 4K
display) using an HDMI cable.
4. Connect the AUDIO OUT terminal block (line out) to a balanced audio
acceptor (for example, a power amplifier with speakers) using an audio
cable.
5. If needed for control, connect the ETHERNET RJ-45 and/or the RS-232
terminal block ports to a network or a serial control device.
6. If needed, connect the INPUT SELECT terminal block to up to six contact
closure switches.
7. If needed, connect an HDBT IR transmitter to the IR 3.5mm mini jack.