Kramer Electronics Ltd.
VS-44H2A
– Using Embedded Web pages
33
Setting Step-In Devices
Use the Step-In Settings page to manage Step-In devices (for example, Kramer
DIP-30
).
To manage a Step-In device:
1. Connect the HDMI output of a Step-In device (for example,
DIP-30
) to an HDMI input on
the
VS-44H2A
.
2. In the Navigation pane, click
Switching
.
The Switching page appears (
).
3. Click the Remote device settings icon
from an Input button (
).
The Step-In Settings group appears and the input button/s to which the Step-In device/s
is connected appear/s purple.
Figure 27: Step-In Settings group
4. Select an input in the Step-In Settings group (HDMI IN 1, HDMI IN 2 or VGA).
The respective button on
DIP-30
illuminates.
Press an input button on the
DIP-30
. The selected input is displayed on the web page.
5. Check the outputs to which the inputs are routed.
6. Press the
STEP-IN
button on
DIP-30
.
The selected Step-In input on the
DIP-30
is routed to the selected outputs on the
VS-44H2A
.
Any time the output Step-In configuration changes, press the STEP-IN button on the Step-In
device to update the configuration.
DRAFT