Kramer VS-44FO, Руководство пользователя

Страница: 35 / 43

32 VS-44FO - Kramer Protocol 3000
9.3 Kramer Protocol 3000 Commands
9.3.1 Device Initiated Messages
Command Syntax
Switcher actions:
Video channel has switched (breakaway mode)
VID IN>OUT
9.3.2 Result and Error Codes
Syntax
Command ran successfully, no error.
COMMAND PARAMETERS OK
Protocol Errors:
Syntax error ERR001
Command not available for this device ERR002
Parameter is out of range ERR003
Unauthorized access (command run without the
matching login).
ERR004
9.3.3 Basic Routing Commands
Command Syntax Response
Switch video
VID IN>OUT, IN>OUT
, …
Short form: V IN>OUT, IN>OUT
, …
VID IN>OUT, IN>OUT
, …RESULT
Read video connection
VID? OUT
Short form: V? OUT
VID? *
VID IN>OUT
VID IN>1, IN>2
, …
Parameter Description:
IN = Input number or '0' to disconnect output.
'
>
' = Connection character between in and out parameters.
OUT = Output number or '*' for all outputs.
Examples:
Switch video input 2 to output 4 #V 2>4CR
~VID 2>4 OKCRLF
Switch video input 4 to output 2
in machine number 6
#6@VID 4>2CR
~6@VID 4>2 OKCRLF
Disconnect video output 4
#AV 0>4CR ~AV 0>4 OKCRLF
Switch video input 3 to all
outputs
#V 3>* CR
~VID 3>* OKCRLF
Chaining
multiple
commands
#V 1>* | V 3>4, 2>2, 2>1, 0>2 | V 3>9 | V? * CR
1. Switch video from input 1 to all outputs.
2. Switch video input 3 to output 4, video input 2 to
output 2, video input 2 to output 1 and disconnect video
output 2.
3. Switch video input 3 to output 9 (non-existent).
4. Get status of all video links.
Command processing begins after entering CR . A
response is sent for each command after processing.
~VID 1>* OKCRLF
~VID 3>4, 2>2, 2>1, 0>2
OKCRLF
~VID ERR003 CRLF
~VID 2>1, 0>2, 1>3, 3>4 CRLF