Kramer VS-42HN, Руководство пользователя

Страница: 37 / 47

34 VS-42HN - Protocol 3000
Command - INFO-PRST? Command Type - System
Command Name Permission Transparency
Set: - - -
Get: INFO-PRST? End User Public
Description Syntax
Set: - -
Get: Get maximum preset count
# INFO-PRST?
␍
Response
~nn@ INFO-PRST?
␠
VID
␠
preset_video_count , AUD
␠
preset_audio_count
␍␊
Parameters
preset_video_count - maximum number of video presets in the unit
preset_audio_count - maximum number of audio presets in the unit
Notes
In most units, video and audio presets with the same number are stored and recalled together by
commands #PRST-STO and #PRST-RCL
Command - LDEDID Command Type - System
Command Name Permission Transparency
Set: LDEDID End User Public
Get: - - -
Description Syntax
Set:
Write EDID data from external
application to device
Multi-step syntax (see following steps)
Get: None None
Communication Steps (Command and Response)
Step 1: # LDEDID
␠
eeprom_id, size
␍
Response 1: ~nn@ LDEDID
␠
eeprom_id, size
␠
READY
␍␊
or
~nn@ LDEDID
␠
ERRnn
␍␊
Step 2: If ready was received, send EDID_DATA
Response 2: ~ nn@ LDEDID
␠
eeprom_id, size
␠
OK
␍␊
Parameters
eeprom_id
–
EEPROM to put the EDID into
size
–
Size of EDID that will send.
EDID_DATA
-
HEX or KFW file in protocol packets (see Section
11.3.1
)
Response Triggers
Response is sent to the com port from which the Set (before execution)
Notes
When the unit receives the LDEDID command it replies with READY and enters the special EDID
packet wait mode. In this mode the unit can receive only packets and not regular protocol commands.
If the unit does not receive correct packets for 30 seconds or is interrupted for more than 30 seconds
before receiving all packets, it sends timeout error ~nn@ LDEDID
␠
ERR01
␍␊
and returns to the
regular protocol mode. If the unit received data that is not a correct packet, it sends the corresponding
error and returns to the regular protocol mode.
See Protocol Packet reference in Section
11.3.1