Kramer VS-42HDCP, Руководство пользователя, Страница: 12 / 47

VS-42HDCP - Connecting the VS-42HDCP 9
9
5 Connecting the VS-42HDCP
Always switch off the power to each device before connecting it to your
VS-42HDCP . After connecting your VS-42HDCP , connect its power
and then switch on the power to each device.
To connect the VS-42HDCP as illustrated in the example in Figure 3 :
1. Connect up to four DVI sources (for example, DVD players and/or Blu-ray
disc players) to the IN DVI connectors.
You do not have to connect all the sources.
2. Connect the two OUT DVI connectors to up to two DVI acceptors (for
example, DVI and/or LCD displays).
You do not have to connect all the outputs.
3. If required, connect a PC and/or controller to the RS-232 port (see
Section
7.1
) and/or the Ethernet port (see Section
7.2
).
4. Connect the power cord (not shown in Figure 3 ).
5. Power the device.
6. If required, acquire the EDID (see Section
6.7
).
i