72
VS-3232DN - Using the Input / Output Cards
When a multi-channel audio input signal is routed to a card with
digital and analog stereo audio outputs, the digital connectors output
multi-channel audio and the analog connectors output the front right
and front left audio channels only.
10.13.1 AAD-IN4-F32 / AAD-OUT4-F32 Configuration
The
AAD-IN4-F32
configuration table appears as follows:
AAD-IN4-F32 Input Card
Parameter
Description
Default
Pattern
RGB Bar, Black.
RGB Bar
Reset Input
Re-power—Power cycles the port.
Factory Default—Performs a factory reset of the port to default
values.
-
Audio Select
Selects the audio source:
Auto—Audio signal selection is controlled by the presence or
absence of a plug in the RCA port. When present, AUD-Digital is
selected, when absent, AUD-Analog is selected.
AUD-Digital—Digital audio is selected from the RCA ports.
AUD-Analog—Analog audio from the 5-pin terminal blocks is
selected.
Auto
Audio Mute
MUTE—Mutes the audio input.
Non-MUTE—Unmutes the audio input.
Note
: When set to Mute, any change to the audio parameters
automatically sets this to unmute.
Note
: Not applicable when digital audio is selected.
Non-MUTE
Volume
Sets the audio output volume (0–70).
Note
: Not applicable when digital audio is selected. Applies to analog
inputs and outputs only.
50
Audio Balance
Sets the audio output channel balance (0–100).
Note
: Not applicable when digital audio is selected.
50
Audio Bass
Sets the audio output bass level (0–15).
Note
: Not applicable when digital audio is selected.
7
Audio Treble
Sets the audio output treble level (0–15).
Note
: Not applicable when digital audio is selected.
7
The
AAD-OUT4-F32
configuration table appears as follows:
AAD-OUT4-F32 Output Card
Parameter
Description
Default
Reset Output
Re-power—Power cycles the port.
Factory Default—Performs a factory reset of the port to default
values.
-
Volume
Sets the audio output volume (0–70).
Note
: Not applicable when digital audio is selected.
50
Audio Balance
Sets the audio output channel balance (0–100).
Note
: Not applicable when digital audio is selected.
50
Audio Bass
Sets the audio output bass level (0–15).
Note
: Not applicable when digital audio is selected.
7