Kramer VS-169TP, Руководство пользователя

Страница: 11 / 45

Your VS-169TP 16x9 CAT 5 Matrix Switcher
7
7
Table 1: VS-169TP 16x9 CAT 5 Matrix Switcher Front Panel Functions
# Feature Function
1 IR Receiver/IR LED The red LED is illuminated when receiving signals from the
infrared remote control transmitter
2 POWER LED Illuminates green when receiving power
3 ALL Button Pressing ALL followed by an IN button, connects that input to
all outputs
1
4 OFF Button Press an OUT selector button and then an OFF button to
disconnect that output from the inputs
Press the ALL button and then the OFF button to disconnect
all the outputs
5 IN Buttons (1 to 16) Select the input (including the two local built-in
transmitters) to switch to the output
6 OUT Buttons (1 to 8, LOCAL) Select the output to which the input is switched, including
the local built-in receiver
7 STO Button
Pressing STO followed by an IN button (from 1 to 15)
stores the current setting
2
8
in the non-volatile memory
RCL
Button Pressing RCL followed by an IN button (from 1 to 15)
recalls a setup from the non-volatile memory
9 FOLLOW Button Pressing FOLLOW followed by the TAKE button enters the
Follow mode in which the UXGA, audio and RS-232
signals switch simultaneously
10
BREAKAWAY
UXGA Button When pressed twice
3
11
the button illuminates and the actions
that follow will relate to UXGA
AUDIO+RS-232 (Tx)
Button
When pressed twice
3
the button illuminates and the actions
that follow will relate to audio/direct
4
12
RS-232
RS-232 (Rx) Button When pressed twice
3
the button illuminates and the actions
that follow will relate to RS-232 reply
4
13
MATRIX STATUS
40x4 LCD Display Displays the selected INPUT (video, audio and RS-232)
switched to the OUTPUT
14 TAKE Button Pressing TAKE toggles the mode between the Confirm
mode
5
15
and the At Once mode (user confirmation per action
is unnecessary). When in Confirm mode, pressing the
TAKE button will implement a pending configuration
LOCK Button Toggles activation/inactivation of the front panel buttons.
When the front panel is locked you can still control via the
interfaces
1 For example, press ALL and then IN button # 3 to connect input # 3 to all the outputs
2 For example, press STO and then the IN button # 3 to store in Setup # 3
3 After pressing once, the button blinks
4 Direct RS-232 refers to the signal transmitted from the transmitter to the receiver; RS-232 reply refers to the signal returned
from the receiver to the transmitter
5 When in the Confirm mode, the TAKE button illuminates