Upgrading the VS-121HC Firmware
23
11. Click
Run
.
As each stage of the operation completes, the check-box for that stage
changes to green
1
.
When the operation is complete, all four check-boxes are green and the
message Memory Verify Pass appears
2
in the status bar.
Figure 17: Atmel – Flip Window (Operation Completed)
12. Close the Atmel – Flip window.
13. Power OFF the
VS-121HC
.
14. If required, disconnect the null-modem adapter
from the
VS-121HC
.
15. Press the FLASH PROG button on the front panel of the
VS-121HC
outward
to its original position (see
Figure 1
).
16. Power ON the
VS-121HC
.
9.2
Upgrading the Ethernet Firmware
To upgrade the
VS-121HC
Ethernet
firmware:
•
Download the file from the Internet (see section
9.2.1
)
•
Connect a PC to the RS-232 port (see section
9.2.2
)
•
Install the latest firmware (see section
9.2.3
)
1 See also the blue progress indicator on the status bar
2 If an error message: “Not Finished” shows, click Run again