Kramer VP-81SIDN, Руководство пользователя

Страница: 20 / 50

16 VP-81SIDN - Connecting the VP-81SIDN 8x1 Digital Step-In Switcher
6.5 Connecting to the VP-81SIDN 8x1 Digital Step-In
Switcher via Ethernet
You can connect to the VP-81SIDN via Ethernet using either of the following
methods:

Directly to the PC using a crossover cable (see Section
6.5.1
)

Via a network hub, switch, or router, using a straight-through cable (see
Section
6.5.2
)
Note : If you want to connect via a router and your IT system is based on IPv6,
speak to your IT department for specific installation instructions.
6.5.1 Connecting the Ethernet Port Directly to a PC
You can connect the Ethernet port of the VP-81SIDN directly to the Ethernet port
on your PC using a crossover cable with RJ-45 connectors.
This type of connection is recommended for identifying the VP-81SIDN
with the factory configured default IP address.
After connecting the VP-81SIDN to the Ethernet port, configure your PC as
follows:
1. Click Start > Control Panel > Network and Sharing Center .
2. Click Change Adapter Settings .
3. Highlight the network adapter you want to use to connect to the device and
click Change settings of this connection .
The Local Area Connection Properties window for the selected network
adapter appears as shown in Figure 7 .
i