Connecting the VP-81K 8x1 UXGA / Audio Switcher
9
6 Connecting the VP-81K 8x1 UXGA / Audio Switcher
To connect the
VP-81K
, as illustrated in the example in Figure 2, do the
following
1
:
1. Connect up to eight
2
UXGA computer graphics sources to the INPUT 15-pin
HD connectors (from 1 to 8).
2. Connect the unbalanced audio sources to up to eight INPUT mini plug
connectors
3
.
3. Connect
4
the 15-pin HD OUTPUT connectors (from 1 to 2) to up to two
UXGA acceptors (for example, a projector to OUTPUT 1 and a display to
OUTPUT 2).
4. Connect the OUT 1 unbalanced audio mini plug connector to an audio
acceptor
3
.
5. Connect the OUT 2 balanced audio terminal block connector (see section 6.1)
to an audio acceptor
3
.
6. Set the dipswitches (see section 6.5).
7. As an option you can connect a PC and/or controller to the:
RS-232 port (see section 6.2)
RS-485 port (see section 6.3)
The ETHERNET connector (see section 6.4)
8. Connect the power cord
3,5
.
1 Be sure that the power is switched OFF on each device before connecting it to your VP-81K. After connecting all the
devices to your VP-81K, switch on the power of the VP-81K, and then switch on the power of each device
2 You do not have to connect all the inputs
3 Not shown in Figure 2
4 You do not have to connect both outputs
5 We recommend that you use only the power cord that is supplied with this machine
