Kramer VP-731, Руководство пользователя

Страница: 23 / 69

18 VP-731 - Presentation Switcher / Scaler Buttons
To replace a PIP source in the same category (for example, changing the PIP
source from HDMI 2 to HDMI 1), press the required PIP Source on the remote
control transmitter and the PIP display will change accordingly.
When attempting to select a PIP source of the same category as the
background source (for example, video on video, which is not compliant
with the table on
Page 19 ), a message is displayed, “Unavailable
Operation”.
6.2.3 Toggling between the PIP and the Screen Source (Swap)
To toggle back and forth between the PIP source and the main display, as Figure
11 illustrates, press the Swap key on the infrared remote control transmitter (see Figure
12 ). You can also do this via the OSD menu by selecting a new Input Source
through the Input menu and a new PIP source through the PIP menu.
Figure 11: The SWAP Status
When selecting one PIP source, the VP-731 automatically recognizes and displays
the selected graphic PIP source on all the video displays and the selected video
source on all the graphic displays, compliant with the table on
Page 19 .
The PIP source appears even if the input signal is not connected. In this case the PIP appears
over a blank screen
To replace a PIP in the same input signal category (for example, changing from
UXGA 1 to HDMI 2), press the button for that PIP Source on the remote control
transmitter and the PIP display will change accordingly.
i