KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-727xl
44
To change the IP address of the unit
1
:
Select the device on the list and then right-click it
A selection box appears, stating “ Set IP Address” and “ Web Control”
2
Select “ Set IP Address” , enter the new IP address and click
Update
The new IP address will appear on the screen
Figure 28: Setting an IP Number
9.4.3
Control the VP-727xl via the Ethernet/Serial Port
To control the
VP-727xl
via the Ethernet, do the following:
1. On the
VP727xl Control Application
screen, click the
Control
tab.
The Control screen appears (see Figure 29).
The Control tab includes a set of control buttons, which enable you to
operate and control the machine via the Ethernet or serial ports,
according to the configuration.
2. Press one of the eight orange buttons (1 to 8) that appear on the top left
side on the screen of the Control tab
3
.
Control the selected machine via the control buttons on the screen
4
.
1 The default IP address can be changed to fit your network system
2 Pressing the Web Control option lets you access the unit’s Web page from which you can change different parameters, such
as the IP address, enable/disable the DHCP client (DHCP is Dynamic Host Configuration Protocol), as well as setting the
Baud rate (for example, 9600 or 115200)
3 When a machine is connected, the button lights. Otherwise it is unavailable
4 Button turns green
