KRAMER: SIMPLE CREATIVE TECHNOLOGY
Understanding the VP-727xl
22
Using the
PROGRAM
output, after pressing the TAKE button, you can see
the transition
1
.
3
.
Pressing the Chessboard
button and then the TAKE
button causes the transition to
occur. The PROGRAM INPUT
button 2 illuminates to
correspond with the PREVIEW
INPUT button 2. The RGBS
source is displayed on both the
PREVIEW and PROGRAM
screens:
2
. During the presentation, the
HD Component source is
outputted via the HDMI
PROGRAM OUT connector.
Before changing to the RGBS
source, the demonstrator
previews how that source
currently looks on his local
The PROGRAM INPUT button 3
and the PREVIEW INPUT button
2 illuminate:
1
. In this example an RGBS source is connected to input 2, and an HD
Component
input 3. Set the OSD Settings as follows
source is connected to
:
Plasma Display
Plasma Display
Figure 9: Example showing the use of the PREVIEW and PROGRAM Output
1 After making some changes in the unit (for example, selecting a new input to the PREVIEW output), the TAKE button will
be turned off (not illuminated) momentarily (until the unit successfully locks to this input). The TAKE button should not be
pressed until it lights up again, otherwise there will be a period of black during the transition
