Kramer VP-727A, Руководство пользователя

Страница: 29 / 32

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Kramer VP-727A Protocol (Ver. 3.21)
26
INSTRUCTION 1
st
Byte 2
nd
Byte 3
rd
Byte 4
th
Byte COMMENT
T-BAR POSITION 23 80 80+Value 81 Value 0~112
See NOTE 1
HEADPHONE SOURCE
PREVIEW
24 80 80 81
HEADPHONE SOURCE
PROGRAM
24 80 81 81
See NOTE 1
READ HEADPHONE SOURCE 25 80 80 81 See NOTE 3
SEND CHANGED AUDIO
PARAMETER INSTRUCTION
3F 80 81 81 See NOTE 7
NOTES on the above table:
NOTE 1:
The reply to these instructions is:
- 1st byte: 0x40 + 1st byte sent
- 2nd byte: Same as 2nd byte sent
- 3
rd
byte: Same as 3
rd
byte sent
- 4
th
byte: Same as 4th byte sent
Example:
1st byte 2nd byte 3rd byte 4th byte
Send 0x02 0x81 0x81 0x81
Reply 0x42 0x81 0x81 0x81
NOTE 2:
In the case of an error, the reply code will be:
- 1
st
byte: 0x50
- 2
nd
, 3
rd
and 4
th
byte – don’t care
NOTE 3:
The reply to these READ commands is:
- 1
st
byte: 0x40 + 1
st
byte sent
- 2
nd
byte: Same as the data that was sent
- 3
rd
byte: Requested data (as defined by the command which sets this parameter)
- 4
th
byte: 0x81
Example:
Read Preview Input 3 Level. The reply in this case tells us that the level is 0x17
1st byte 2nd byte 3rd byte 4th byte
Send 0x19 0x93 0x80 0x81
Reply 0x59 0x93 0x97 0x81
Example:
Read Program Input #. The reply in this case tells us that the Input 4 is connected to the Program output
1st byte 2nd byte 3rd byte 4th byte
Send 0x06 0x81 0x80 0x81
Reply 0x46 0x81 0x84 0x81
NOTE 4:
In the case where the VP-727A is in “ FADE” mode (ie, not “ CUT” mode), it will send this command via RS-232 after it has
completed the transition.