background image

 

 

Step 6:  Operate VP-550X 

Operate 

VP-550X

:  

  Remotely, by RS-232 serial 

commands transmitted by a touch 
screen system, PC, or other serial 
controller. 

  Using the embedded webpages 

via the Ethernet  

  Remotely, using the IR remote 

control transmitter. 

  Via the front panel buttons.  

RS-232 Control / Protocol 3000  

Baud Rate:  

115,200 

Parity:  

None 

Data Bits:  

Command Format: 

ASCII 

Stop Bits:  

 

 

Example: (route input HDMI 2 to the outputs): 

#ROUTE

1

,

1

,

2<CR>

 

Default Ethernet Parameters 

IP Address: 

 

192.168.1.39 

 

UDP Port #:  

50000 

Subnet mask:  

255.255.0.0 

TCP Port #:  

5000 

Gateway:  

192.168.0.1 

 

 

 

Authentication 

 

User/Password 

Admin/Admin 

 

 

  Via the OSD menu buttons using the front panel navigation buttons. 

 

OSD Menu Item 

Function 

Picture 

Set the Contrast brightness and color. 
For VGA: adjust the phase, clock horizontal and vertical 
position. 
For video: adjust the hue, sharpness, and noise reduction. 

Input 

Select the input. 

Output 

Define image size. 
Enable or disable bypass mode. 
Select the output resolution. 

Audio 

Set the input volume for each input individually. 
Set the output volume. 
Set delay time. 
Enable or disable DRC and loudness. 
Mute/unmute the output audio. 
Set the audio source for each input to analog or embedded, or 
select automatically. 
Define microphone settings: mic mode, depth, trigger, attack 
time, hold time, and release time. 
Adjust mic volume. 
Adjust equalizer level per bandwidth. 
Enable/bypass DSP. 

OSD 

Define OSD position, timeout timer, transparency, and display. 

EDID Manage 

For each input, acquire the EDID from a selected output or use 
a default EDID value.  

Advanced 

Define Ethernet parameters. 
Set HDCP modes. 
AUTO sync off option. 
Define auto switch mode. 
Set Lock mode behavior. 
Enable/disable daily reset. 
View device lifetime. 

Info. 

View the input and output information, and firmware version. 

Factory 

Perform full factory reset. 
Perform soft reset, excluding Ethernet parameters. 

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. 

 

Содержание VP-550X

Страница 1: ...posite video input 4 FREEZE Button Press to freeze unfreeze the output video image Not applicable when in video bypass mode 5 MUTE Button Press to toggle between muting blocking out the sound and enabling the audio output both line and speakers Muting the audio is not applicable when in audio bypass mode 6 MENU Button Press to enter exit the on screen display OSD menu 7 Navigation Buttons Press to...

Страница 2: ...N 3 pin Terminal Block Connector Connect to a PC or remote controller to control VP 550X via RS 232 Protocol commands 21 LINE OUT Balanced Stereo 5 pin Terminal Block Connector Connect to a balanced stereo analog audio acceptor 22 CTRL OUT 3 pin Terminal Block Connectors Connect to an acceptor for example a display to control it via RS 232 Protocol 3000 commands 23 ETHERNET Connector Connects to t...

Страница 3: ...ety Instructions See www kramerav com for updated safety information Caution For products with relay terminals and GPI O ports please refer to the permitted rating for an external connection located next to the terminal or in the User Manual There are no operator serviceable parts inside the unit Warning Use only the power cord that is supplied with the unit Disconnect the power and unplug the uni...

Страница 4: ... size Enable or disable bypass mode Select the output resolution Audio Set the input volume for each input individually Set the output volume Set delay time Enable or disable DRC and loudness Mute unmute the output audio Set the audio source for each input to analog or embedded or select automatically Define microphone settings mic mode depth trigger attack time hold time and release time Adjust m...

Отзывы: