Kramer VP-461, Руководство пользователя

Страница: 38 / 59

VP-461 - The Display Modes 33
33
6.2.3 Selecting the PIP Source
To select a PiP source you have to set the VP-461 to any of the PiP display mode
configurations and then select the desired input.
6.2.3.1 Selecting the PiP Source via the Front Panel Buttons
Press and hold the PIP front panel button while pressing the input button of the
required PiP source.
For example, to select DIsplayPort as the PiP source over PC as the main source,
press the PIP front panel button while pressing the DIsplayPort front panel button
(see Figure 20 ).
In this example, the PC button is illuminated and the DIsplayPort button blinks
Figure 20: DP superimposed over PC
6.2.3.2 Selecting the PiP Source via the IR Remote Control Transmitter
Press the PIP button on the IR transmitter (the PIP front panel button is
illuminated). Press the desired PiP source button on the IR transmitter (see Section
7.4
).