14
VP-461 - The OSD Menu
Setting
Function
Input Settings Set the:
H Image Shift
– to set the horizontal position of the image within the window
M
/
P
Volatile parameter
V Image Shift
– to set the vertical position of the image within the window
M
/
P
Volatile parameter
Auto Positioning
– to search the input image during the tuning process and
automatically position it on the output window in a perfect fit.
Set to
Off
to disable auto positioning
Set to
Normal
Scan to perform a normal range image search
Set to
Wide Scan
to perform a wide range image search
M
/
P
In the Normal/Wide Scan option, the machine automatically adjusts all the PC input
video resolutions (PC 1 and PC 2). For the other inputs, the machine automatically
adjusts all the input video resolutions except for HD/SD (CEA 861 standard) video
resolutions
HDCP Mode
– to select the HDCP option for the HDMI input: either ON (the
default) or OFF.
Setting HDCP mode to Off on the HDMI input allows the source to transmit a
non-HDCP signal if required (for example, when working with a Mac
computer).
EDID Select
– to select the native resolution on the input to be read by the
video source connected to that input: 1024x768@60, 1280x800@60,
1280x1024@60, 1366x768@60, 1440x900@60, 1400x1050@60,
1600x900@60, 1600x1200@60, 1680x1050@60, 1920x1200@60RB,
720p50, 720p60, 1080p50, 1080p60 (default), 2K50 or 2K60
Note that for the HDMI and DP inputs, you can either select the color depth to
be 8bpp or 12bpp after selecting the native resolution
Note that when the EDID is set on the inputs, the changes are per
input and immediate.
Color Space
– to select the color space for the PC and HDMI inputs: RGB,
YPbPr or Follow Input
Note that if the machine is set to the dual display mode, and both the Main
and PiP windows display the same input, set the same input color space value
for both windows
Window
Customization
Select the position and the size of the selected window: H Position, H Width,
V Position and V Height (see
Section
5.2.1.2
and
Section
5.2.1.1
)
M
/
P
The value range is dynamic, the FW prevents windows from exceeding boundaries
or over-sizing and the position and size of the windows are saved to the system.
The size and position of the customized window (main or PiP) remain valid even
when toggling the PIP button (front panel, remote control transmitter or protocol
command).
The customized setup is run over only by explicitly selecting a preset Display Mode
(see above in table).
Only if a new setup is created or a preset display mode is selected, this new setup
runs-over the current, customized, setup.
The PiP window maximum horizontal active image area is
1600 pixels
i
i
Содержание VP-461
Страница 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODEL VP 461 Video Scaler P N 2900 300195 Rev 1...
Страница 2: ......
Страница 3: ......
Страница 58: ......