Kramer VP-440X, Руководство пользователя

Страница: 10 / 71

Kramer Electronics Ltd.
VP-440X
– Connecting VP-440X
8
Connecting VP-440X
Always switch off the power to each device before connecting it to your VP-440X . After
connecting your VP-440X , connect its power and then switch on the power to each device.
Figure 3: Connecting to the VP-440X Rear Panel
To connect the VP-440X as illustrated in the example in Figure 3 :
1. Connect the video sources.
▪
A computer graphics source to the PC IN 15-pin HD connector .
▪
HDMI sources (for example, a laptop, two Blue-ray players, and a gaming console) to
the four HDMI IN connectors
.
2. Connect an analog stereo audio source (not shown in Figure 3 ) for each of the four
HDMI inputs and for the PC input to the 3.5mm mini jack connectors.
3. Connect the video outputs:
▪
An HDBaseT receiver (for example, Kramer TP-580Rxr ) to the HDBT IN RJ-45
connector .
▪
An HDMI acceptor to the HDMI OUT connector .
4. Connect an unbalanced stereo audio acceptor (for example, active speakers, not shown
in Figure 3 ) to the AUDIO OUT 3.5mm mini jack .
5. Connect a laptop to the Ethernet RJ-45 connector .
6. Connect the 5V power supply to the 5V DC power terminal block .
7. Connect a PC or serial controller (not shown in Figure 3 ) to the CONTROL (Tx, Rx, G)
terminal block connector , to control the unit via serial control.
14
9
15 16
17
19
18
20
21
12