VP-427UHD
Quick Start
P/N: 2 9 0 0 - 3 0 1 1 5 6 QS
Rev:
3
Scan for full manual
VP-427UHD Quick Start Guide
This guide helps you install and use your
VP-427UHD
for the first time.
www.kramerav.com/downloads/VP-427UHD
to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check
what’s in the box
VP-427UHD
HDMI/HDBT Receiver/Switcher/Scaler
1 Bracket set
1 Quick start guide
1 Power adapter and cord
4 Rubber feet
Step 2: Get to know your VP-427UHD
#
Feature
Function
1
IN LED
Lights green when the HDMI input is selected, blue when HDBT is selected and flashes if no
input signal is detected.
2
HDBT/HDMI Button
Press to select the remote HDBT or the local HDMI source.
3
HDMI
™ OUT Status LED
Lights green when an HDMI acceptor is connected.
4
HDBT LINK status LED
Lights green when an HDBT link between a transmitter and the receiver is successfully
established and is active.
5
ON LED
Lights green when the unit is powered from the local 12V DC source and lights blue when
receiving PoE via HDBT.
6
MENU Button
Press to enter the OSD menu. When in OSD, press to exit one level up.
7
ENTER Button
When not in OSD, press ENTER to view the input status on the display (the selected input,
resolution and frame rate, HDCP state and aspect ratio).
When in OSD, press to select and carry out a menu item or to accept a parameter value.
Press and hold together with the
– or + to increase the speed of parameter-decrement or
increment, respectively.
Press and hold for about 3 seconds to reset a menu parameter to its default values.
8
– Button
Press and hold together with the + button to reset the output resolution to 1080p (default).
In OSD, press to move back through the menu list or to decrement a parameter value (or
press together with ENTER to speed up parameter decrement).
9
+ (also Freeze) Button
Press and hold together with the
– button to reset the output resolution to 1080p (default).
When not in OSD: press to freeze the image;
In OSD, press to move forward through the sub-menu list or to increment the parameter
value (or press together with ENTER to speed up parameter increment).
10
FREEZE LED
Lights green when freezing the image.
11
HDBT IN RJ-45 Connector
Connects to an HDBaseT transmitter.
12
HDMI IN Connector
Connect to an HDMI source.
13
HDMI OUT Connector
Connects to an HDMI acceptor.