KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VP-2XLK 1:2 UXGA / Audio Distributor
6
5 Connecting the VP-2XLK 1:2 UXGA / Audio Distributor
To connect the
VP-2XLK
, as the example in Figure 3 illustrates:
1. Connect a computer graphics source to the UXGA IN HD15F connector
and to the R and L AUDIO IN RCA connectors.
2. Connect the UXGA OUT HD15F connectors to up to
1
two acceptors (for
example, a display and a projector) and connect the respective R and L
AUDIO OUT RCA connectors to audio acceptors (for example, two
amplifiers with speakers).
3. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not illustrated in Figure 3).
4. If required:
Check that the SYNC PROC.
button is pushed in (the default), to activate
the sync processing
Adjust the AUDIO LEVEL, the UXGA LEVEL, and/or the UXGA EQ.
(equalization) compensation level
Set the coupling switches to AC or DC
Set the ID BIT to ON
Figure 3: Connecting the VP-2XLK 1:2 UXGA / Audio Distributor
1 When both outputs are not required, connect only the output that is required and leave the other output unconnected
