background image

 

 
 

 

KRAMER ELECTRONICS LTD.

                                                                          10                    

6.3 

Adding more outputs 

If more outputs than the two outputs the VP-200xl provides are needed, then any 
of Kramer VGA/XGA distribution amplifiers may be used. The VP-200, for 
example, provides 2 outputs, the VP-300 provides 3, the VP-400 provides 4 and 
so on up to the VP-12 that is able to provide 12 parallel outputs from a single 
input.  All is needed is to connect one of the outputs of the VP-200xl to the input 
of the selected distributor. 
 

6.4 Adding 

more 

inputs 

If more inputs are needed, then one of Kramer’s VGA/XGA switchers may be 
installed in front of the VP-200xl. Some suitable machines are the VP-201 (2 
inputs), VP-32xl (3 inputs), VP-61xl (6 inputs) etc. 
   

7 SPECIFICATIONS 

 

INPUT:  

Analog Red, Green, Blue signals - 0.7 Vpp/75 

, H & V sync, TTL 

level, on HD15F connector. 

OUTPUTS:  2 Analog Red, Green, Blue signals - 0.7 Vpp/75 

, H & V syncs-

TTL level, on HD15F connectors. 

VIDEO BANDWIDTH:  Exceeding 405 MHz. 
CONTROLS: 

 

Level: -0.4 to +3.5dB, EQ.: 0 to +8dB @ 100 MHz   

DIFF. GAIN:  <0.08%. 

    

DIFF. PHASE:   <0.05 

Deg. 

COUPLING: 

 

AC. 

 

 

 

 

K-FACTOR:  <0.05%. 
S/N RATIO:  

 

73 dB. 

POWER SOURCE: 

12 VDC, 60 mA. 

DIMENSIONS: 

12cm x 7.5cm x 2.5cm (4.7"x2.95"x0.98", W, D, H.). 

WEIGHT:  

 

0.25 kg. (0.55 lbs.) Approx. 

ACCESSORIES:   

Power supply, mounting bracket. 

OPTIONS:   

 

Model VA-50P power supply with 6x12VDC outlets. 

 
 
 
 
 
 
 
 

Содержание VP-200XL

















Отзывы: