6
VM-8UX
– Connecting the VM-8UX
4
Connecting the VM-8UX
Always switch off the power to each device before connecting it to
your
VM-8UX
. After connecting your
VM-8UX
, connect its power and
then switch on the power to each device.
You do not have to connect all the inputs and outputs, connect only
those that are required.
1. Connect an SDI video source (for example, a 12G SDI camera) to the
INPUT BNC connector.
2. Connect up to eight video OUT BNC connectors to the appropriate HD-SDI
video acceptors (for example, 12G SDI displays).
For best results, when only one of the paired outputs (OUT 1 + OUT 2, OUT 3 + OUT 4,
OUT 5 + OUT 6 and OUT 7 + OUT 8) is connected, cover its pair connector with a 75Ω
terminator (supplied).
For example, if only OUT 3 is connected, cover OUT 4 with a terminator (the other
outputs do not need to be covered).
3. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in
Figure 2
).
Figure 2: Connecting to the VM-8UX
Содержание VM-8UX
Страница 1: ...USER MANUAL MODEL VM 8UX 12G SDI 1 8 DA P N 2900 300751 Rev 1 www KramerAV com ...
Страница 2: ......
Страница 3: ......
Страница 12: ......