KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting a VM-8DVI-R 1:8 DVI Distributor
6
6 Connecting a VM-8DVI-R 1:8 DVI Distributor
To connect the
VM-8DVI-R
as a 1:8 DVI distributor, do the following:
1. Connect a DVI source (for example, a DVI graphics source) to the INPUT
connector.
2. Connect the 8 OUTPUT connectors
1
to up to 8 DVI acceptors, as follows:
The OUTPUT 1 connector to the DVI acceptor (for example, a
projector)
The OUTPUT 2 to OUTPUT 8 connectors to the DVI acceptors (for
example, displays)
3. Connect the power cord to the mains electricity and turn ON the POWER.
4. Acquire the EDID (see section 6.1).
Display
Display
Projector
DVI
Graphics
Source
Figure 2: Connecting a VM-8DVI-R 1:8 DVI Distributor
1 As required. Up to 8 outputs can be connected on the VM-8DVI-R. Not all outputs need to be connected