Technical Specifications
9
6.2 Setting the Dipswitches
This section describes the machine dipswitches. By default, all the
VM-8DVI-R
dipswitches are set to OFF and AUTO. Figure 3 and Table 2
describe the dipswitches, which consist of two sets, from 1 to 8 and from 1 to 2.
EDID
OUTPUT
PORT
SELECT
OFF
MANUAL
ON
AUTO
1 2 3 4 5 6 7 8
EDID
SELECT
MODE
Figure 3: VM-8DVI-R Dipswitches
Table 2: Dipswitches settings
DIPS
Feature
Function
1 to 8
EDID OUTPUT PORT SELECT
Set one of the dipswitches (from 1 to 8) to ON, to
select the port from which the EDID will be
acquired in the MANUAL mode
1 to 2
EDID SELECT MODE
Set both dipswitches either to MANUAL or AUTO
for manual or automatic selection of the EDID
7 Technical Specifications
Table 3 includes the technical specifications:
Table 3: Technical Specifications
1
of the VM-8DVI-R 1:8 DVI Distributor
INPUT:
1 DVI
2
, 1.2Vpp on a DVI Molex 24pin female connector; DDC signal 5Vpp
(TTL)
OUTPUTS:
8 DVI
2
, 1.2Vpp on DVI Molex 24pin female connectors; DDC signal 5Vpp (TTL)
BANDWIDTH:
1.65GHz
CONTROLS:
Dipswitches for selecting and storing EDID information
POWER SOURCE:
10 Watts (maximum) 220V
DIMENSIONS:
19-inch (W), 7-inch (D), 1U (H)
WEIGHT:
2.5 kg. (5.5 lbs.) approx.
ACCESSORIES:
Power cord, Brackets (with screws)
1 Specifications are subject to change without notice
2 On a DVI connector. Note that only the digital signal (DVI-D) is available on the DVI connector