Using the VM-24HDMI
13
4. Press the EDID READ button to copy the EDID of the selected OUTPUT
to the inputs
1
.
While the EDID is being copied, the EDID SELECT and READ buttons
illuminate.
The new EDID is copied when both buttons no longer illuminate.
6.4.2
Acquiring the Default EDID
To reset to the default EDID
2
, do the following:
1. Connect the power supply.
2. Press the EDID SELECT button and set it to the Default EDID mode.
All the OUTPUT STATUS LEDs blink simultaneously.
3. Press the EDID READ button to copy the default EDID to the inputs
1
.
While the EDID is being copied, the EDID SELECT and READ buttons
illuminate.
The new EDID is copied when both buttons no longer illuminate.
6.4.3
Acquiring the Auto-mix EDID from the Connected Outputs
To acquire the Auto-mix EDID
3
:
1. Connect the power supply.
2. Connect the desired output display devices.
3. Enter the Auto-mix mode as defined in Table 2.
All the OUTPUT STATUS LEDs light.
4. Press the READ button to copy the EDID of the selected OUTPUT to the
inputs
1
.
While the EDID is being copied, the EDID SELECT and READ buttons
illuminate.
The new EDID is copied when both buttons no longer illuminate.
1 If you want to cancel the EDID modification, wait for a few seconds without touching any button
2 The factory-default which is programmed into the VM-24HDMI before it is shipped
3 The EDID acquired is a weighted average of all the connected outputs. For example, if several displays with different
resolutions are connected to the outputs, the acquired EDID supports all the resolutions, as well as other parameters included
in the EDID