VM-212DT
Quick Start (P/N: 2900-300878QS REV 2)
P/N:
2 9 0 0 - 3 0 0 8 7 8 QS
Rev:
2
Scan for full manual
VM-212DT Quick Start Guide
This guide helps you install and use your
VM-212DT
for the first time.
Go to
www.kramerav.com/downloads/VM-212DT
to download the latest user manual and check if
firmware upgrades are available.
Step 1:
Check what’s in the box
VM-212DT
HDMI/HDBT Switcher/DA
4 Rubber feet
1 Set of rack ears
1 Power cord
1 Quick start guide
Step 2: Get to know your VM-212DT
#
Feature
Function
1
IR
LED
Lights yellow when receiving signals from the IR remote control sensor.
2
IR
Remote Control Sensor
Sensor for an IR transmitter. IR data is routed according to the IR routing configuration.
3
POWER
LED
Lights green when the unit receives power.
4
VOLUME
Buttons
▼ Down
Press to decrease the audio volume.
5
▲ Up
Press to increase the audio volume.
6
INPUT
Button
Press to toggle between HDMI Input 1 and HDBT Input 2. Lights red when the input is valid,
selected and routing to an output(s).
7
1 HDMI
LED
Lights green when
HDMI 1
Input is selected.
8
2 HDBT
LED
Lights green when
HDBT 2
Input is selected.
9
EDID
Buttons
READ
Press to read the selected EDID to both inputs (see Step 6).
10
SELECT
Press to cycle through the EDID sources, (default, external, and each output) from which to
read the EDID. The relevant LED lights green (see Step 6).
11
OUTPUT
LEDs
1
to
3
In normal operation mode: lights green when an acceptor is connected to the output.
In EDID mode: the relevant LEDs light during EDID setup (see Step 6).
12
EDID TYPE
LEDs
DEFAULT
Lights green when the default EDID is selected (see Step 6).
13
EXT
.
Lights green when an external EDID is selected.
14
OUTPUT
Lights green when one of the output EDIDs is selected.
#
Feature
Function
1
INPUT 1 HDMI
Local Input
Connect to the HDMI source.
2
INPUT 2 HDBT
Remote Input
Connect to the remote HDBT transmitter, (for example, the
WP-20
or
TP-580Txr
).
3
OUTPUT 1 HDMI
Local Output
Connect to the HDMI acceptor.
