6
VM-1H4C – Defining the VM-1H4C 1:4 HDMI Over CAT 5 DA
4
Defining the VM-1H4C 1:4 HDMI Over CAT 5
DA
The
VM-1H4C
encodes the HDMI and IR signals and transmits them over TP
cable to a compat ble receiver (for example, the Kramer
TP-574
HDMI/RS-232/IR
Line Receiver
).
Figure 1
defines the front and rear panels of the
VM-1H4C
.
Figure 1: VM-1H4C 1:4 HDMI Over CAT 5 DA Front and Rear Panels
#
Feature
Function
1
POWER
LED
Lights green when the unit receives power
2
REMOTE IR
3.5mm Mini Jack
Connect to the remote IR blaster or receiver
3
INPUT
LED
Lights green when the input receives a signal
4
EDID
READ
Button
Press to capture the EDID from the active output
5
SELECT
Button
Press to select the output from which to capture the EDID
6
OUTPUT
LEDs
The relevant LED lights green when the output is connected
7
INPUT
HDMI Connector
Connect to the HDMI source
8
RS-232
9-pin D-sub
Connector
For the use of Kramer service personnel only
9
OUT 1
~ 4
TP Output
RJ-45
Connectors
Connect to the LINE IN RJ-45
connector on the TP receivers,
for example, TP-574 (See
Section 7
10
)
12V DC
Power Connector
Connect to the +12V DC power adapter. Center pin positive
Содержание VM-1H4C
Страница 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODEL VM 1H4C 1 4 HDMI Over CAT 5 DA P N 2900 300133 Rev 2 ...
Страница 2: ......
Страница 15: ......