Connecting the VA-40 4 Channel PC Image Shifter
5
5
Connecting the VA-40 4 Channel PC Image Shifter
To connect the
VA-40
, as the example in
Figure 2
illustrates, do the
following
1
:
1. Connect the computer graphics video signal cable from each source PC
(from one to four) to its INPUT connector
2
on the
VA-40
.
2. Connect the OUTPUT connector to each acceptor display (from one to
four).
3. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity.
Figure 2: Connecting the VA-40 4 Channel PC Image Shifter
1 Switch OFF the power on each device before connecting it to your VA-40. After connecting your VA-40, switch on its
power and then switch on the power on each device
2 Not all inputs and outputs need to be connected