Operating Your VA-8xl and VA-16xl
5
Figure 4 illustrates how to connect an unbalanced audio input channel:
Figure 4: Unbalanced Audio Input Channel
Figure 5 illustrates how to connect an unbalanced audio output channel:
Figure 5: Unbalanced Audio Output Channel
When switching on the VA-8xl or VA-16xl (after a previous session), the
VA-8xl or VA-16xl briefly scan each channel
1
, showing the settings in the
7-segment LED Displays
1
. After that, the VA-8xl or VA-16xl go to channel
1, and show its gain/attenuation level in dB.
During regular work, the VA-8xl or VA-16xl show the status of the last
channel you observed and/or changed.
To observe the status of a Channel, do the following:
•
Press a CHANNEL SELECTOR button.
That CHANNEL SELECTOR button illuminates
2
and the decibel values of
the selected channel appear in the dimmed
3
7-segment LED Displays
1
1 Stored in the non-volatile memory
2 For about 20 seconds
3 When the LEDs are dimmed, you cannot change the gain or attenuation - the values are for observation only