Kramer TP-900UHD, Руководство пользователя

Страница: 3 / 35

3
Feature Function
11 HDBT IN RJ-45 Connector Connects to an HDBaseT transmitter
12 HDMI IN Connector Connect to HDMI source
13 HDMI OUT Connector Connects to an HDMI acceptor
14 AUDIO BALANCED OUT
Terminal Block Connector
Connect the balanced stereo audio output to a balanced stereo audio acceptor
15 S/PDIF digital audio
output
Connect to digital audio acceptor
16 IR input/output Connect to IR Emitter or Sensor for the remote control of any external device
17 Ethernet RJ-45 Connector Connect via a LAN to a PC for unit control or to any external device to establish pass-through
Ethernet link between this device and another device connected to HDBT transmitter
18 RS-232 Terminal Block
Connector
Connects to a controller or to any external device to establish pass-through serial link be -
tween this device and another device connected to RS-232 port of HDBT transmitter
19 12V DC +12V DC connector for powering the unit
Step 3: Install the TP-900UHD
Attach the rubber feet and place on a table or mount the TP-900UHD in a rack (using an optional RK-T2B rack mount).
Step 4: Connect the inputs and outputs
Always switch off the power on each device before connecting it to your TP-900UHD .
Always use Kramer high-performance cables connecting AV equipment to the TP-900UHD .
Step 5: Connect the power
If the unit does not receive power via PoE, connect the 12V DC power adapter to the TP-900UHD and plug the adapter into the main
electricity.