Kramer TP-600TR, Руководство пользователя

Страница: 11 / 17

Kramer Electronics Ltd.
TP-600TRxr
– Connecting the 4K60 HDMI/USB Extender
9
Send serial commands from SL-240C to the camera via RS-232.
10. Connect the power adapter to TP-600TRxr and to the mains electricity (not shown in
Figure 5 ).
TP-600TRxr is connected.
Connecting TP-600TR
Figure 6: Connecting to TP-600TR
To connect TP-600TR as illustrated in the example in Figure 5 :
1. Use the DIP-switches to define one device as a transmitter and the other as a
receiver (see Setting the DIP-Switches on page 11 ).
2. Connect the HDBT port on the TP-600TR transmitter side to the HDBT port on
the TP-600TR receiver side.
3. On the TP-600TR transmitter side, connect an HDMI source (for example, a laptop) to
the HDMI Tx IN connector .
4. On the TP-600TR transmitter side, connect the HDMI Rx OUT/Tx LOOP connector
to an HDMI acceptor.
5. On the TP-600TR receiver side, connect the HDMI Rx OUT/Tx LOOP connector to
an HDMI acceptor (for example, a smart TV).
6. Connect the USB ports:
▪
Connect the HOST USB port to a laptop or room PC.
The HOST USB port can be connected to either the transmitter or the receiver
side, as necessary.
▪
Connect the USB DEVICE ports on the transmitter side to USB devices (for example,
the room microphone, mouse, and keyboard).
▪
Connect the USB DEVICE ports on the receiver side to USB devices (for example, a
smart board, soundbar and camera).
14
9 9
10
11
11