Connecting and Configuring the TP-185
7
7
6 Connecting and Configuring the TP-185
This section comprises connecting:
•
The
TP-185
(see
Section 6.1
•
To the
TP-185
via RS-232 (see
)
Section 6.2
•
To the
TP-185
via RS-485 (see
)
Section 6.3
•
Multiple
TP-185
units via RS-485 (see
)
Section 6.4
6.1 Connecting the TP-185
)
To connect
1
the TP-185, as illustrated in the example
2
in
Figure 2
:
Figure 2: Connecting the TP-185, 8 Channel UXGA/Audio/RS-232 to CAT 5 Transmitter
1 You do not need to connect all inputs and outputs
2 Switch off the power on each device before connecting it to your TP-185. After connecting your TP-185, switch on its power and then
switch on the power on each device. DO NOT push in the rear panel Flash Program PROG button , it is only used for upgrading to the
latest Kramer firmware