Kramer TP-133 Скачать руководство пользователя страница 13

 

10 

TP-133/TP-134 - Adjusting RGB and Compensation on the TP-134 

 

Adjusting RGB and Compensation on the 

TP-134 

The skew and equalization can be set either manually or automatically.  

After connecting the 

TP-133

/

TP-134

 

to the power adapters (assuming that the 

twisted pair 

link is working), the LINK and POWER LEDs on the front of the 

 

TP-134

 light green.   

Note:

 During any setup, the process times-out after 10 seconds and the device 

returns to normal operation.  

6.1 

Setting the Skew and Equalization Manually  

The color and equalization can be set either with the live signal or using the built-
in pattern generator. 

6.1.1 

Setting the Skew and Equalization Manually (Using a Live 

Signal)  

To set the color and equalization using a live signal

1.  Press the COLOR button briefly. 

The RED LED flashes red.  

2.  To change the red gain, press the + or – button to increase or decrease the 

gain respectively.  

3.  To move to the green setting, press and hold the COLOR button for three 

seconds.  
The GREEN LED flashes green. 

4.  To change the green gain, press the + or – button to increase or decrease 

the gain respectively. 

5.  To move to the blue setting, press and hold the COLOR button for three 

seconds.  
The BLUE LED flashes blue. 

Содержание TP-133



















Отзывы: