Overview
3
3 Overview
The Kramer
VP-200N
,
VP-300N
and
VP-400N
are high performance 1:2, 1:3
and 1:4 distribution amplifiers for XGA and higher resolution signals. They
are upgrades of the best-selling
VP-200
,
VP-300
and
VP-400
machines, with
larger bandwidth and DC coupling throughout, for best linearity.
The
VP-200N
,
VP-300N
and
VP-400N
:
Accept one input, provide correct buffering and isolation, and then distribute
the signal to 2, 3 or 4 identical outputs on high-density 15 pin HD connectors
Have video bandwidth exceeding 400MHz, ensuring that the machines
remain transparent even at high-resolution graphics modes such as UXGA
(1600x1200)
Accept analog or digital syncs
1
and provide ID Bit control
2
Achieving the best performance means:
Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)
Avoiding interference from neighboring electrical appliances and
positioning your
VP-200N
,
VP-300N
and/or
VP-400N
in a location free from
moisture and away from excessive sunlight and dust
Caution
– No operator-serviceable parts inside unit.
Warning
– Use only the Kramer Electronics input power
wall adapter that is provided with this unit
3
.
Warning
– Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 Via a pair of underside switches. Note that both the Hs (horizontal sync) switch and the Vs (vertical sync) switch MUST be
set identically
2 Via an underside switch. Sometimes notebook computers refuse to output a VGA signal to an external VGA monitor. By
setting the ID BIT to ON, the notebook will output to an external VGA monitor
3 For example: model number AD2512C, part number 2535-000251
