Kramer TBUS-4, Руководство пользователя, Страница: 8 / 14

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Installing the TBUS-4 Table Connection Bus
6
Table 2: TBUS-4 Connecting Surface Features
# Feature Function
1 Power Socket 1 Power socket for PC1
2 Ethernet connector 1 RJ-45 (female / female)
3 USB connector 1 USB-A (female / female)
4 Audio connector 1 3.5 mm stereo audio (female / female)
5 PC connector 1 Computer graphics 15 pin HD (female / female)
6 Power Socket 2 Power socket for PC2
7 Ethernet connector 2 RJ-45 (female / female)
8 USB connector 2 USB-A (female / female)
9 Audio connector 2 3.5 mm stereo audio (female / female)
10 PC connector 2 Computer graphics 15 pin HD (female / female)
5 Installing the TBUS-4 Table Connection Bus
To install TBUS-4 , perform the following steps:
1. Cut an opening in the table (see section 5.1).
2. Adjust the height of the connecting surface (see section 5.2).
3. Install optional insert (see section 5.3).
4. Install
TBUS-4
in the cut-out opening (see section 5.4).
5. Connect the cables (see section 5.5).
5.1 Cutting an Opening in the Table
To cut an opening in the table:
1. Place the included cut-out template on the surface of the table where you want
to install TBUS-4 .
2. Attach the template to the table with the included screws.
3. Following the inside edge of the template, cut a hole in the table surface with a
sabre or keyhole saw according to the dimensions shown in Figure 4 (not to
scale).
Note
: The thickness of the table should be 3 inches or less.