KRAMER: SIMPLE CREATIVE TECHNOLOGY
Installing the Speakers
6
5.2
Installing the Speaker Wires
To install the speakers, do the following:
1. Connect the black and red stereo sockets of the active speaker to the black
and red stereo sockets of the passive speaker using the cable supplied, as
follows:
Figure 4: Connecting the Speakers
2. Set the red power selector switch to the correct setting for your country.
3. Connect the input source (for example, a CD or a DVD player and so on).
4. Connect the power.
5. Adjust the volume on the input source.
6. Adjust the volume control on the rear side control panel.
7. If required, connect an additional set of speakers by connecting the LOOP
OUTPUT connector to the input of a second active speaker.
8. If required, mount the speaker on the wall via the removable mounting
brackets. To do so:
Mark the location of the mounting holes
Screw the mounting screws
1
Slide the mounting bracket over the mounting screws so that the
mounting bracket is secured to the surface
into the mounting holes
1 Not included in the package
Active Speaker
Passive Speaker
