Installing the Speakers
5
5
Table 1: SPK-OCA508 Features (for the Active Speaker)
#
Feature
Function
1
VOLUME
Button
Rotate the button to adjust the audio volume
2
LINE INPUT
3.5mm Mini Connector
Connect the audio source to either connector
3-pin Terminal Block
3
LOOP OUTPUT
3.5mm Mini
Connector
Connect to another pair of active speakers
4
SUB OUT
3.5mm Mini Connector
If required, connect an active sub-woofer to this output for
maximum bass reproduction
5
Active Speaker
Stereo Sockets
Red (+)
Connect the active speaker to the black and red stereo
sockets on the passive speaker
6
Black (-)
7
Voltage Selector Switch
Push up for 230V/50Hz down for 115V/60Hz
8
AC-INPUT
Power Supply
Connector to the AC power cord
9
POWER Switch
For turning the unit ON (I), OFF (0) or AUTO off (II)
5
Installing the Speakers
This section explains how to:
•
Choose the best location for your speakers (see section
5.1
)
•
Install the speaker wires (see section
5.2
)
5.1
Choosing the Best Location
Before installing the speakers:
•
Experiment by placing the speakers in different locations before finally
deciding on the most suitable location
•
Be sure that the wall type is appropriate for the mounting brackets, that
is, either solid wood, bricks, concrete, hollow building blocks, or wood
studs. You cannot mount the brackets on gypsum walls
•
Check that the mounting location is free of obstructions, such as
electrical piping, AC ducts or water lines, and so on
