Kramer SPK-C613, Руководство пользователя

Страница: 12 / 20

8 SPK-C613 - Installing the Open-back Ceiling Speakers
3. Adjust each speaker to the appropriate tap setting before installing the grille
(see Figure 4 ).
Set the tap according to the power requirements of the speaker based on its location in
the room (for example, a speaker located in a remote corner would require additional
power )
Figure 4: Adjust Tap Selector
For 100V installations, DO NOT set the tapping switch beyond 30W.
Doing so may cause damage to both the speaker and the amplifier.
4. Insert the supplied screws into the screw openings from the front of the
speakers.
5. Connect the speaker wires to the speaker terminals.
6. Insert the speaker into the opening and tighten the screws.
When tightening the screws, the tabs automatically turn outward, thus
clamping the speaker to the wall from its rear side.
Do not over-tighten the screws. It may cause damage to both the
speakers and the surface.
7. Push the grille firmly into the slot in the speaker baffle.
5.3.1 Using the Suspended Ceiling Speaker Mounting Kit (Optional)
To install the Open-back ceiling speakers using the mounting kit, do the following:
1. Place the C-ring over the hole cut in the ceiling tile (on the “ceiling” side).
Place it around the hole so that the tabs are located in parallel to the tile
edges (see
Figure 5 ).
!
i