1 | When the canister is full with water, the safety feature will be activated. Which means that the suction force
decreases and the appliance produces a sound to indicate that it is full. If this happens, disconnect the po-
wer and empty the canister. Then switch the appliance back on.
2 | Should the appliance tip over, the safety feature starts up automatically. Please switch off the power and set
the device upright again. Turn it back on.
3 | If this safety feature is still in operation and the appliance is still in use, the appliance could overheat thus
resulting in damage such as fire. In this case turn off the appliance and empty the canister. The appliance
is once again ready for use.
5
| SAFETY FEATURES
6
| MAINTENANCE
1 | Cleaning the canister
* After using this appliance or when the canister is full, disconnect from the mains and empty the canister.
1 | Open the locking clips and remover the canister cover.
2 | Remove the filter bag and empty the dust .
3 | Replace the filter bag and reattach the canister cover.
2 | Cleaning the filter bag
When the filter bag is dirty, it should be washed in clean, warm water, If necessary, a light detergent may be used.
1 | Remover filter
2 | Wash
3 | Let air dry thoroughly