Flash Memory Upgrade
13
1. Type the unit’s IP number
1
Figure 12
in the Address bar of your browser (or type
any link defined by the system integrator).
The
RC-8IR
front panel is displayed on your screen (see
).
2. Press the on-screen buttons to control the unit.
Figure 12: Internal Web Page Front Panel
7 Flash Memory Upgrade
The RC device firmware is located in FLASH memory, which lets you
upgrade to the latest Kramer firmware version in minutes!
The process involves:
•
Downloading the upgrade package from the Internet (see section
7.1
)
•
Connecting the PC to the RS-232 port (see section
7.2
)
•
Upgrading the firmware (see section
7.3
)
•
Installing the Web Applet (see section
7.4
)
7.1 Downloading from the Internet
You can download the up-to-date file
2
1. Go to our Web site at
http://www.Kramerelectronics.com
and download the
file: “
SetKFRXXX-xx.zip
”
from the technical support section.
from the Internet. To do so:
2. Extract the file “
SetKFRXXX-xx.zip
”
package, which includes the
KFR-Programmer application setup, the
.s19
firmware file and the Web
Applet
dat
file, to a folder (for example, C:\Program Files\KFR Upgrade).
3. Install the KFR-Programmer Application.
1 The default IP number is 192.168.1.39, and may be changed by the system integrator
2 File names are liable to change from time to time
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
