KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the RC-8IR Universal Room Controller
10
6.1 Operating the RC-8IR
In the following example
1
Figure 10
that is illustrated in
, the
RC-8IR
is
labeled with specific functions and each button is programmed
2
to perform
several tasks
3
Table 5
as defined in
.
Each button may be assigned with up to 15 commands.
Table 5: The Commands Configuration
The Label
The Macro Sequence
ON
OFF
DVD
PC
VCR
Vol
UP
Vol
DOWN
HELP
DESK
Figure 10: RC-8IR Labels
Setup
ON
•
Power up the projector
•
Power up the power amplifier
•
Power up the DVD player
•
Power up the video player
•
Roll down the projector screen
•
Turn on the speakers
•
1 minute delay [for the
projector to heat up]
•
Turn lights off
•
The projector selects the PC input
OFF
•
Turn lights on
•
Power down the projector
•
Power down the power amplifier
•
Stop the DVD player
•
Power down the DVD player
•
Stop the video player
•
Power down the video player
•
Roll up the projector screen
•
Turn off the speakers
DVD
•
Stop the video player
•
The projector selects the DVD input
•
Play the DVD
VCR
•
Stop the DVD
•
The projector selects the VCR input
•
Play the VCR
PC
•
Stop the DVD
•
Stop the VCR
•
The projector selects a PC input
Vol UP
•
Power amplifier volume up
Vol DOWN
•
Power amplifier volume down
HELP DESK
•
Call for technical assistance
1 This is only one example among numerous possibilities, each button can be configured as required
2 By the system integrator
3 A macro sequence, including up to 15 commands per button, carried out one after the other
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
