Kramer RC-3TB, Руководство пользователя, Страница: 13 / 23

10 SL-14RC - Connecting the SL-14RC
6 Connecting the SL-14RC
Always switch off the power to each device before connecting it to your
SL-14RC . After connecting your SL-14RC , connect its power and then
switch on the power to each device.
To connect the SL-14RC as illustrated in the example in Figure 4 :
1. Connect the RELAY terminal block connectors as follows:

Connect RELAY 1 to the lighting system

Connect RELAY 2 to the screen
2. Connect the I/O port to a motion detector.
3. Connect the IR outputs as follows:

Connect an IR emitter to IR OUTPUT 1 and attach the emitter to the
DVD player

Connect an IR emitter to IR OUTPUT 2 and attach the emitter to the
power amplifier
4. Connect the RS-232 ports (see Section 6.1 ) as follows:

Connect RS-232 port 1 to the projector

Connect RS-232 port 3 to the plasma display
5. Connect the Ethernet port to a network (see Section 6.2 ).
6. Connect the K-NET port to the input of the first RC-3TB (see Section 6.3 ) .
7. Connect the output of the first RC-3TB to the input of the second RC-3TB
(see Section 6.3.2 ).
i