12
SL-14RC - Connecting the SL-14RC
6.2
Connecting the Ethernet Port
The Ethernet connection of the
SL-14RC
lets you perform all control functions of
the
SL-14RC
over the Internet using a PC running the Kramer Site-CTRL control
program.
To connect the
SL-14RC
to a network:
1. Connect the Ethernet port of the
SL-14RC
to the Ethernet port on a network
hub or network router, via a straight cable with RJ-45 connectors.
2. At the other end, connect the Internet to a PC running
Site-CTRL
.
3. After connecting the Ethernet port, you have to install and configure it. For
detailed instructions on how to install and configure your Ethernet port, see
the
K-Config Software Guide
available from our Web site at
www.kramerelectronics.com
.
6.3
Connecting RC-3TB Remote Control Panels (Optional)
One or more
RC-3TB
panels may be connected to the
K-NET
port on the
SL-14RC
in a daisy-chain configuration.
The wiring from a
K-NET
port to a single
RC-3TB
is shown in
Figure 6: K-NET to RC-3TB Connection